unsolved G0 instead of G1 ??

[Giovanni]

Hi,
I've looked at the Gcode generated for my cutting laser. This is what I've seen :
The travel between two forms cutted is done with G1 instead of G0.
Is there a good reason, because this is a waste time loosed ...
BR.
Giovanni

G0 X 79.000 Y 96.000
M3 M8
G0 Z 1.000
F3500
G1 Z -0.010
F1300
G1 X 80.500 Y 96.000
G1 X 82.000 Y 96.000
G1 X 82.000 Y 56.500
G1 X 82.000 Y 17.000
G1 X 80.500 Y 17.000
G1 X 79.000 Y 17.000
F3500
G1 Z 1.000
G0 Z 1.000
M9 M5

(* SHAPE Nr: 1 *)
G0 X -4.000 Y 62.000
M3 M8
G0 Z 1.000
G1 Z -0.010
F1300
G1 X -4.000 Y 52.000
G1 X -4.000 Y 42.000
G1 X -6.125 Y 42.000
G1 X -8.250 Y 42.000
G1 X -8.250 Y 52.000
G1 X -8.250 Y 62.000
G1 X -7.375 Y 62.000
G1 X -6.500 Y 62.000
F3500

 

[spicer]

I am not a laser specialist.
But when moving to X 79,000 Y 17,000 or X -6,500 Y 62,000, the laser is still switched on and is therefore a “working” distance.
So G01 is actually the correct command. G00 is only the fast feed.